Pin Joint Two Stage Telescopic Hydraulic Cylinder

The pin joint two-stage telescopic hydraulic cylinder is a cutting-edge hydraulic element designed to provide efficient and reliable power transmission for a variety of industrial applications. With its innovative design, superior performance, and versatility, this hydraulic cylinder offers precise control and increased productivity. Whether used in construction, agriculture, or material handling, pin jonint two-stage telescopic hydraulic cylinders are designed to optimize the hydraulic operation and provide superior results.

CX series compact cylinders are used for clamping cylinders. Its installation is small. Our factory has advanced hydraulic equipment, including a vertical and horizontal machining center and medium and large hydraulic cylinders. Thin cylinder production technology is excellent.

Pin Joint Two Stage Telescopic Hydraulic Cylinder Parameter:

Pin Joint Two Stage Telescopic Hydraulic Cylinder Key Features and Benefits:

1. Two-Stage Telescopic Design:
   • The Pin Joint Two Stage Telescopic Hydraulic Cylinder features a two-stage telescopic design that increases stroke length while maintaining a compact retracted size.
   • This design provides flexibility in hydraulic applications where extended reach is required without sacrificing space constraints.
2. Pin Joint Construction:
   • The cylinder incorporates pin joint construction, which enables smooth and synchronized movement of the telescopic stages.
   • The pin joint mechanism ensures operation stability, precision, and excellent load-bearing capacity.
3. Precise Control:
   • This hydraulic cylinder offers exceptional control over extension and retraction, allowing precise positioning and efficient operations.
   • The precise control mechanism ensures smooth and controlled movement, enhancing overall productivity.
4. High Load-Bearing Capacity:
   • The Pin Joint Two Stage Telescopic Hydraulic Cylinder is engineered to handle heavy loads and demanding industrial applications.
   • It provides excellent load-bearing capacity, making it suitable for lifting, pushing, or pulling substantial weights.

Pin Joint Two Stage Telescopic Hydraulic Cylinder Método de uso:

1. Mounting and Installation:
   • Determine the appropriate installation location for the pin joint secondary telescopic hydraulic cylinder based on the specific requirements of your equipment or machine.
   • Ensure that the mounting surface is strong, level, and can safely support the weight and load of the cylinder.
2. Hydraulic System Connection:
   • Connect the hydraulic cylinder to the hydraulic system using a compatible hydraulic hose or pipe.
   • Align and secure the connections properly to prevent leaks and ensure optimal performance.
3. Operating the Cylinder:
   • Start the hydraulic system and start the movement of the two-stage telescopic hydraulic cylinder of the pin joint.
   • The hydraulic control system is used to precisely control the extension of the cylinder and improve the operating efficiency.

How To Replace Seals In Hydraulic Cylinder?

To remove a hydraulic cylinder from a chair, follow these steps:

1. Prepare the Workspace:
   • Clear the area around the chair to create a safe and unobstructed workspace.
   • Place a protective covering or cloth on the floor to prevent damage to the chair or surrounding surfaces.
2. Lower the Chair:
   • Use the chair’s adjustment lever or control mechanism to lower it to its lowest position.
   • This step ensures that the cylinder is fully compressed, making removing it easier.
3. Locate the Cylinder:
   • Identify the hydraulic cylinder on the chair. It is typically located near the chair’s base and connects to the seat or the chair’s mechanism.
4. Remove the Chair Seat:
   • If the chair seat is detachable, locate the mounting screws or bolts that secure it to the cylinder or chair base.
   • Use the appropriate tool, such as a screwdriver or wrench, to remove the screws or bolts.
   • Lift the seat off the chair, exposing the hydraulic cylinder.
5. Support the Chair:
   • Since the chair will be unstable without the seat, provide support to prevent it from tipping over.
   • Use a sturdy object, such as a box or a wooden block, to prop up the chair’s remaining structure.
6. Disconnect the Cylinder:
   • Examine the connection points between the hydraulic cylinder and the chair mechanism or base.
   • Depending on the chair design, you may find mounting brackets, clips, or screws securing the cylinder.
   • Remove any fasteners holding the cylinder in place using the appropriate tools.
   • Once the fasteners are removed, gently pull or wiggle the cylinder to detach it from the chair.
7. Replace or Dispose of the Cylinder:
   • If you are replacing the hydraulic cylinder, ensure you have a compatible replacement that matches the specifications of the old cylinder.
   • If necessary, consult the chair manufacturer or a professional to obtain the correct replacement cylinder.
   • If you are disposing of the cylinder, follow your local regulations and guidelines for proper disposal.
8. Reassemble the Chair:
   • Reattach the chair seat by aligning the screw holes and securing them with the appropriate screws or bolts if you removed the chair seat.
   • Ensure the seat is firmly attached and stable before using the chair again.

Aptidão e capacidade da fábrica:

(1) Montagem

Temos uma plataforma de montagem de pesquisa e desenvolvimento independente de primeira classe. A oficina de produção de cilindros hidráulicos tem quatro linhas de montagem semiautomáticas de cilindros de elevação e uma linha de montagem automática de cilindros de inclinação, com uma capacidade de produção anual projetada de 1 milhão de peças. A oficina de cilindros especiais é equipada com várias especificações de um sistema de montagem de limpeza semiautomática com uma capacidade de produção anual projetada de 200.000 peças e equipada com famosos equipamentos de usinagem CNC, um centro de usinagem, um equipamento especial de processamento de cilindros de alta precisão, uma máquina de solda robotizada, uma máquina de limpeza automática, uma máquina de montagem automática de cilindros e uma linha de produção de pintura automática. O equipamento crítico existente é de mais de 300 conjuntos (conjuntos). A alocação ideal e o uso eficiente dos recursos do equipamento garantem os requisitos de precisão dos produtos e atendem às necessidades de alta qualidade dos produtos.

(2) Usinagem

A oficina de usinagem é equipada com um centro de torneamento de trilho inclinado personalizado, um centro de usinagem, uma máquina de brunimento de alta velocidade, um robô de soldagem e outros equipamentos relacionados, que podem lidar com o processamento de tubos de cilindros com diâmetro interno máximo de 400 mm e comprimento máximo de 6 metros.

(3) Soldagem

(4) Pintura e revestimento

Com linhas de revestimento de tinta à base de água automáticas de cilindros de pequeno e médio porte, para obter carregamento e descarregamento automáticos de robôs e pulverização automática, a capacidade projetada é de 4.000 peças por turno;
Também temos uma linha de produção de tinta semiautomática para cilindros grandes, acionada por uma corrente elétrica, com capacidade de projeto de 60 caixas por turno.

(5) Testes

Temos instalações de inspeção e bancos de teste de primeira classe para garantir que o desempenho do cilindro atenda aos requisitos.

We are one of the best compact hydraulic cylinder manufacturers. We can offer comprehensive compact hydraulic cylinder stock. We also provide corresponding caixas de câmbio agrícolas. Exportamos nossos produtos para clientes em todo o mundo e conquistamos uma boa reputação devido à qualidade superior de nossos produtos e ao serviço pós-venda. Convidamos clientes nacionais e estrangeiros a entrar em contato conosco para negociar negócios, trocar informações e cooperar conosco!