30SD08-25 Solenoid Directional Valve

Welcome to the world of precision hydraulic control with the 30SD08-25 solenoid directional valve. Designed to meet the demands of diverse industrial applications, this cutting-edge valve offers exceptional performance, reliability, and efficiency.

The 30SD08-25 solenoid directional valve is your gateway to enhanced hydraulic control. With its precise fluid flow management, versatility, high flow capacity, and quick response time, this valve empowers your hydraulic system to reach new levels of performance and efficiency. By following the recommended usage methods and maintenance guidelines, you can harness the full potential of the 30SD08-25 solenoid directional valve and achieve seamless control, increased productivity, and improved overall performance. Elevate your hydraulic system today with the 30sd08-25 solenoid directional valve and experience the power of precise hydraulic control.

30SD08-25 Solenoid Directional Valve Characteristics:

1. Precise Fluid Flow Management:

• The 30SD08-25 solenoid directional valve empowers you with precise control over fluid flow in your hydraulic system.
• With its accurate flow management capabilities, this valve ensures optimal performance and responsiveness.

2. Versatile Applications:

• This valve is designed to cater to various industrial applications, making it a versatile solution for hydraulic systems.
• Whether you require precise control in manufacturing, construction, or automation, the 30SD08-25 solenoid directional valve delivers the needed performance.

3. High Flow Capacity:

• With its high flow capacity, this valve can handle significant fluid volumes, enabling efficient and reliable operation.
• The valve’s ability to accommodate high flow rates ensures that your hydraulic system operates smoothly, even in demanding conditions.

4. Quick Response Time:

• Equipped with state-of-the-art solenoid technology, the 30SD08-25 solenoid directional valve boasts an impressive response time.
• Experience rapid and accurate control adjustments, allowing seamless fluid flow direction changes and improved system efficiency.

30SD08-25 Solenoid Directional Valve Parameter:

30SD08-25 Solenoid Directional Valve Advantages:

• Continuous-duty rated coil
• Both ports may be fully pressurized
• Efficient wet-armature construction
• Cartridges are voltage interchangeable
• Optional waterproof E-Coils rated up to IP69K
• Industry common cavity
• Hardened parts for long life and low leakage

Usage Method Of 30SD08-25 Solenoid Directional Valve:

1. System Evaluation:

• Begin by evaluating the specific requirements of your hydraulic system, considering factors such as flow rates, pressure levels, and system dynamics.
• Assess whether the 30SD08-25 solenoid directional valve aligns with your system’s needs and performance expectations.

2. Valve Selection:

• Select the appropriate variant of the 30SD08-25 solenoid directional Valve based on your system parameters and performance requirements.
• Consider factors such as flow capacity, pressure ratings, and compatibility with other system components for optimal functionality.

3. Installation:

• Follow the manufacturer’s installation instructions diligently to ensure proper placement and secure valve mounting.
• Position the valve correctly within the hydraulic system, considering fluid flow direction and accessibility for maintenance purposes.

4. Electrical Connections:

• Connect the solenoid valve to the designated power source per the manufacturer’s specifications.
• Ensure the electrical connections are secure, adhering to safety standards and regulations.

How To Install A Hydraulic Pressure Relief Valve?

Installing a hydraulic pressure relief valve is a crucial step in ensuring the safety and proper functioning of a hydraulic system. Here’s a step-by-step guide on how to install a hydraulic pressure relief valve:

1. Identify the Valve: Determine the specific type and model of the hydraulic pressure relief valve you work with. Ensure it is suitable for your application and compatible with your hydraulic system requirements.
2. Gather the Required Tools and Materials: Collect the necessary tools and materials, including appropriate hydraulic fittings, adapters, wrenches, Teflon tape (thread sealant), and a pressure gauge if needed. Refer to the manufacturer’s instructions for any specific tools or components required.
3. Prepare the Hydraulic System: Shut down the hydraulic system and relieve pressure by activating the relief valve or retracting hydraulic cylinders. This step is crucial for safety and prevents accidental movement or hydraulic fluid release.
4. Identify the Pressure Relief Point: Determine the optimal location to install the hydraulic pressure relief valve in your hydraulic system. It should be positioned downstream of the pump before any sensitive components to protect them from excessive pressure. Consult the hydraulic system schematic or seek professional advice if necessary.
5. Mount the Valve: Securely mount the hydraulic pressure relief valve in the chosen location using appropriate brackets or clamps. Ensure the valve is positioned correctly, aligning the inlet and outlet ports with the flow direction. Follow the manufacturer’s instructions for specific mounting requirements.
6. Connect the Inlet and Outlet Ports: Attach hydraulic hoses or tubing to the inlet and outlet ports of the relief valve. Use suitable hydraulic fittings and adapters to create a leak-free connection. Apply Teflon tape or thread sealant to the male threads of the fittings to ensure a secure and sealed connection. Tighten the connections using wrenches to avoid leaks, but be careful not to overtighten.
7. Set the Pressure Relief Setting: Most hydraulic pressure relief valves come with an adjustable pressure relief setting. Adjust the relief valve to the desired pressure relief point using the manufacturer’s guidelines. Some valves may require a pressure gauge to accurately set the relief pressure. Install the pressure gauge temporarily, if needed, and adjust the relief valve until the desired pressure is achieved.
8. Test the System: Once the hydraulic pressure relief valve is installed, slowly restore hydraulic system pressure. Monitor the pressure gauge or observe the system behavior to ensure that the relief valve functions correctly. The relief valve should open and divert excess pressure when it reaches the set point, preventing damage to the system.
9. Monitor and Maintain: Regularly inspect the hydraulic pressure relief valve for any signs of leakage, damage, or reduced performance. Clean the valve and surrounding area to remove dirt and debris that may affect its operation. Follow the manufacturer’s recommended maintenance schedule and guidelines to ensure optimal performance and longevity.

Kemampuan & Kapasitas Pabrik:

(1) Perakitan

Kami memiliki platform perakitan penelitian dan pengembangan independen kelas satu. Bengkel produksi silinder hidrolik memiliki empat jalur perakitan silinder pengangkat semi-otomatis dan satu jalur perakitan silinder kemiringan otomatis, dengan kapasitas produksi tahunan yang dirancang sebesar 1 juta keping. Bengkel silinder khusus dilengkapi dengan berbagai spesifikasi sistem perakitan pembersihan semi-otomatis dengan kapasitas produksi tahunan yang dirancang sebesar 200.000 dan dilengkapi dengan peralatan permesinan CNC yang terkenal, pusat permesinan, peralatan khusus pemrosesan silinder presisi tinggi, mesin las robot, mesin pembersih otomatis, mesin perakitan silinder otomatis, dan jalur produksi pengecatan otomatis. Peralatan penting yang ada lebih dari 300 set (set). Alokasi optimal dan penggunaan sumber daya peralatan yang efisien memastikan persyaratan akurasi produk dan memenuhi kebutuhan produk berkualitas tinggi.

(2) Pemesinan

Bengkel permesinan dilengkapi dengan pusat pembubutan rel miring yang disesuaikan, pusat permesinan, mesin pengasah berkecepatan tinggi, robot pengelasan, dan peralatan terkait lainnya, yang dapat menangani pemrosesan tabung silinder dengan diameter bagian dalam maksimum 400mm dan panjang maksimum 6 meter.

(3) Pengelasan

(4) Pengecatan & pelapisan

Dengan jalur pelapisan cat berbasis air otomatis silinder kecil dan menengah, untuk mencapai bongkar muat robot otomatis dan penyemprotan otomatis, kapasitas desain 4000 buah per shift;
Kami juga memiliki lini produksi cat semi-otomatis untuk silinder besar yang ditenagai oleh rantai daya, dengan kapasitas desain 60 kasus per shift.

(5) Pengujian

Kami memiliki fasilitas inspeksi kelas satu dan test bed untuk memastikan bahwa kinerja silinder memenuhi persyaratan.

We are one of the best hydraulic cylinder manufacturers. We can offer comprehensive hydraulic cylinders. We also provide corresponding gearbox pertanian. Kami telah mengekspor produk kami ke klien di seluruh dunia dan mendapatkan reputasi yang baik karena kualitas produk dan layanan purna jual kami yang unggul. Kami menyambut pelanggan di dalam dan luar negeri untuk menghubungi kami untuk menegosiasikan bisnis, bertukar informasi, dan bekerja sama dengan kami!