Hydraulic System For Metallic Equipment

The hydraulic system for metallic equipment is a robust and reliable solution designed to meet the hydraulic needs of various metal equipment in industrial applications. This advanced hydraulic system offers superior performance, efficiency, and versatility, making it essential for driving and controlling metal machinery. From metal processing to heavy equipment, metal equipment hydraulic systems provide reliable power delivery, precise control, and increased productivity.

Hydraulic System For Metallic Equipment Parameter:

Motor Power:4KW
Oil Tank:60L
System Pressure:14Mpa
System Flow:14/min

Custom Hydraulic System Model Description:

Structure Of Oil Tank:

Oil Tank Cleaning Cap:

Custom Hydraulic System:

(1)Vertical Hydraulic System

(2)Horizontal Hydraulic System

(3)Side Mounting Hydraulic System

The side mounting hydraulic pump station, that is, the oil pump device, is horizontally installed on the basis of a separate tank, and the side type can be equipped with a spare pump, which is mainly used for the system with a large mailbox capacity of 250 liters and an electric power of 7.5KW or more.

Hydraulic System For Metallic Equipment Karbantartás:

• The Hydraulic System for Metallic Equipment is highly versatile and can be integrated into various metallic equipment, including presses, shears, bending machines, etc.
• Its adaptability makes it suitable for various industries, such as metal fabrication, automotive manufacturing, and heavy machinery.

How To Bleed Air From A Hydraulic System?

Bleeding air from a hydraulic system is a necessary maintenance procedure to ensure optimal performance and prevent spongy or erratic hydraulic operation. Here’s a step-by-step guide on how to bleed air from a hydraulic system:

1. Identify Bleed Points:
   • Locate the bleed points in your hydraulic system. These are typically air vent valves or bleed screws placed at high points in the system where air tends to accumulate.
2. Prepare the System:
   • Ensure that the hydraulic system is turned off and depressurized. This is crucial for safety reasons.
3. Position the Equipment:
   • Position the equipment or machinery so that the bleed points are easily accessible. It may require adjusting the orientation or tilting the equipment to allow air to escape effectively.
4. Loosen the Bleed Points:
   • Carefully loosen the air vent valves or bleed screws using the appropriate wrench or tool. Loosen them just enough to allow trapped air to escape without entirely removing them.
5. Start Bleeding:
   • Activate the hydraulic system or start the equipment, and allow the hydraulic fluid to circulate. This will create pressure and push the air towards the bleed points.
6. Bleed Air:
   • Gradually open the air vent valve or bleed screw at the system’s highest point, allowing air to escape. You may notice air bubbles or a hissing sound as air is released.
   • Maintain the bleed point open until you observe a steady flow of hydraulic fluid without any air bubbles. This indicates that air has been purged from the system.
7. Close the Bleed Points:
   • Once all the air has been bled from the system, carefully close the air vent valves or bleed screws. Ensure that they are tight enough to prevent any leaks.
8. Repeat the Process:
   • If your hydraulic system has multiple bleed points or you suspect air presence in different sections of the system, repeat steps 4 to 7 for each bleed point until all air is removed.
9. Check Fluid Level:
   • Verify the hydraulic fluid level in the reservoir or tank. If necessary, add fluid to maintain the recommended level.
10. Test System Operation:
    • With the hydraulic system fully bled, test its operation to ensure that it functions smoothly without any issues. Activate the equipment or machinery and observe its performance.

A gyár kapacitása és kapacitása:

(1) Összeszerelés

Első osztályú független kutatási és fejlesztési összeszerelési platformmal rendelkezünk. A hidraulikus hengergyártó műhely négy félautomata emelőhenger-összeszerelő sorral és egy automata billenőhenger-összeszerelő sorral rendelkezik, tervezett éves gyártási kapacitása 1 millió darab. A speciális henger műhely különböző specifikációjú félautomata tisztító összeszerelő rendszerrel van felszerelve, amelynek tervezett éves termelési kapacitása 200.000, és híres CNC megmunkáló berendezéssel, megmunkáló központtal, nagy pontosságú hengerfeldolgozó speciális berendezéssel, robothegesztő géppel, automatikus tisztítógéppel, automatikus henger összeszerelő géppel és automatikus festési gyártósorral van felszerelve. A meglévő kritikus berendezések több mint 300 készlet (készlet). A berendezések erőforrásainak optimális elosztása és hatékony felhasználása biztosítja a termékek pontossági követelményeit és megfelel a termékek minőségi igényeinek.

(2) Machining

The machining shop is equipped with a customized inclined rail turning center, machining center, high-speed honing machine, welding robot, and other related equipment, which can handle the processing of cylinder tubes with a maximum inner diameter of 400mm and a maximum length of 6 meters.

(3) Welding

(4) Painting & coating

With small and medium-sized cylinder automatic water-based paint coating lines, to achieve automatic robot loading and unloading and automatic spraying, the design capacity of 4000 pieces per shift;
We also have a semi-automatic paint production line for large cylinders powered by a power chain, with 60 cases per shift design capacity.

(5) Testing

We have first-class inspection facilities and test beds to ensure that the performance of the cylinder meets the requirements.

We are one of the best hydraulic system manufacturers. We can offer comprehensive hydraulic system. We also provide corresponding agricultural gearboxes. We have exported our products to clients worldwide and earned a good reputation because of our superior product quality and after-sales service. We welcome customers at home and abroad to contact us to negotiate business, exchange information, and cooperate with us!