Työstökoneiden matalapaineinen hydraulisylinteri

Low-pressure hydraulic cylinder is the company’s advantage in products, manufacturing experience, mature technology, cost-effectiveness, and can replace the hydraulic cylinder.

Combined with the market demand, sort out the machine tool industry low-pressure hydraulic cylinder parameters, such as band saw machine hydraulic cylinder.

Customers can order according to the following parameters, convenience and fast delivery time.

Low cost: Low-pressure hydraulic cylinders are usually cheaper than other cylinders.
Simple design: The design and manufacture of low-pressure hydraulic cylinders is relatively simple.
Easy maintenance: Low-pressure hydraulic cylinders are relatively easy to maintain.

Low-Pressure Hydraulic Cylinder Parameter:

(1) Low-Pressure Hydraulic Cylinder Front Flange:

(2)Low-Pressure Hydraulic Cylinder Back Flange:

(3) Low-Pressure Hydraulic Cylinder Front Pin:

(4) Low-Pressure Hydraulic Cylinder Intermediate Pin:

(5) Low-Pressure Hydraulic Cylinder Rear Pin:

(6) Low-Pressure Hydraulic Cylinder Footstand Parameter:

Technical Parameter Of Low-Pressure Hydraulic Cylinder:

The installation mode can be selected from the following options
1) Piston rod end thread size: internal thread or external thread, thread size and length
2) oil port position;
3) The “total length” in the parameter table, that is, the length of the cylinder when the stroke is 0, such as the stroke is 100mm, the total length of the cylinder = the “total length” value +100

Scope Of Application Of Low-Pressure Hydraulic Cylinder :

1) The use of pressure range is below 5MPA;
2) The front cover, back cover, and piston are castings, the cylinder is No. 20 steel, and the piston rod is No. 45 steel chrome-plated;
3) The default cylinder is mainly affected by thrust; If it is mainly due to tension, the customer needs to make special instructions;
4) The inner diameter range of this series of products is 63~125 mm, the maximum thrust is 4.8 tons;
5) No buffer by default; If buffering is required, the customer needs special instructions.

How To Measure Hydraulic Cylinder?

To measure a hydraulic cylinder, you’ll need a few basic tools such as a tape measure or ruler, a caliper, and possibly a depth gauge. Here’s a step-by-step guide on how to measure a hydraulic cylinder:

1. Extended Length:
   • Ensure that the hydraulic cylinder is fully extended.
   • Measure the distance from the center of the mounting hole on one end of the cylinder to the center of the mounting hole on the other end. This measurement represents the extended length or overall length of the cylinder.
2. Retracted Length:
   • Retract the hydraulic cylinder fully.
   • Measure the distance from the center of the mounting hole on one end of the cylinder to the center of the mounting hole on the other end. This measurement represents the retracted length of the cylinder.
3. Bore Diameter:
   • Measure the internal diameter of the cylinder barrel, which is referred to as the bore diameter. This is typically done using a caliper.
   • Place the caliper jaws inside the cylinder barrel and measure the distance between the inner surfaces of the cylinder barrel walls.
4. Rod Diameter:
   • Measure the diameter of the piston rod. This is typically done using a caliper.
   • Place the caliper jaws around the piston rod and measure the distance between the outer surfaces of the rod.
5. Stroke Length:
   • The stroke length refers to the distance the piston rod can travel between fully extended and fully retracted positions.
   • Subtract the retracted length measurement from the extended length measurement to obtain the stroke length.
6. Seal and Bearing Dimensions:
   • If necessary, measure the dimensions of any seals or bearings that are part of the hydraulic cylinder. This may include outer diameter, inner diameter, and thickness measurements.

Tehtaan kapasiteetti ja kapasiteetti:

(1) Kokoonpano

We have a first-class independent research and development assembly platform. The forklift cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one automatic tilt cylinder assembly line, with a designed annual production capacity of 1 million pieces; Special cylinder workshop is equipped with various specifications semi-automatic cleaning assembly system, designed annual production capacity of 200,000. Equipped with famous CNC machining equipment, machining center, high-precision cylinder processing special equipment, robot welding machine, automatic cleaning machine, automatic cylinder assembly machine, and automatic painting production line. Existing key equipment of more than 300 sets (sets). The optimal allocation and efficient use of equipment resources ensure the accuracy requirements of products and meet the high-quality requirements of products.

(2)Machining

The machining shop is equipped with customized inclined rail turning center, machining center, high-speed honing machine, welding robot and other related equipment, which can handle the processing of cylinder tubes with a maximum inner diameter of 400mm and a maximum length of 6 meters.

(3) Hitsaus

(4) Maalaus ja pinnoitus

Pienillä ja keskisuurilla sylinterin automaattisilla vesipohjaisilla maalipinnoituslinjoilla automaattisen robotin lastaus- ja purku- ja automaattisen ruiskutuksen saavuttamiseksi, suunnittelukapasiteetti on 4000 kappaletta vuorossa;
We also have a semi-automatic paint production line for large cylinders powered by a power chain, with a design capacity of 60 cases per shift.

(5) Testaus

Meillä on ensiluokkaiset tarkastustilat ja testialustat, joilla varmistetaan, että sylinterin suorituskyky täyttää vaatimukset.

We are one of the best low-pressure hydraulic cylinder manufacturers. We can offer wide low-pressure hydraulic cylinder stock. We also provide corresponding maatalousvaihteistot. Olemme vieneet tuotteitamme asiakkaillemme ympäri maailmaa ja ansainneet hyvän maineen ylivoimaisen tuotteidemme laadun ja myynnin jälkeisen palvelun ansiosta. Toivotamme lämpimästi tervetulleeksi asiakkaat sekä kotimaassa että ulkomailla ottamaan yhteyttä meihin neuvottelemaan liiketoiminnasta, vaihtamaan tietoja ja tehdä yhteistyötä kanssamme!