Kolbvarda ots välise keermega ühendus Engineering hüdrosilinder

The piston rod end with an external thread connection is located at the end of the engineering hydraulic cylinder piston rod. It usually has threaded sections that allow for the safe fastening of various components, such as mounting brackets, cracks, or other load-bearing structures.

HSG series engineering hydraulic cylinder is a double-acting piston rod hydraulic cylinder. Installation mode adopts earring type. According to the connection between the cylinder head and the cylinder block, there are three kinds of external thread connection, internal card critical connection, and flange connection. Engineering hydraulic cylinder is mainly used in construction, lifting, mining, and other hydraulic systems.

HSG Engineering Hydraulic Cylinder Parameter:

HSG Engineering Hydraulic Cylinder Advantages:

The piston rod end with an external thread connection offers several advantages in engineering hydraulic cylinders:

1. Versatility:
   • Threaded connections provide the flexibility to connect various components or load-bearing structures, allowing customization and adaptation to different application requirements.
2. Secure Fastening:
   • External threads ensure a secure and reliable connection, minimizing the risk of loosening or detaching during operation.
   • This enhances the safety and stability of hydraulic cylinder assemblies, especially in demanding or high-strength applications.
3. Ease of Maintenance and Replacement:
   • External threaded connections simplify maintenance and replacement of parts, allowing for quick disassembly and reassembly.
   • This helps inspect, repair, or replace damaged or worn parts, reducing downtime and improving overall system efficiency.

HSG Engineering Hydraulic Cylinder Applications:

The external thread connection on the piston rod end offers versatility and convenience in various engineering applications, including:

1. Mounting Brackets and Supports:
   • The threaded connection enables the attachment of mounting brackets or supports to the hydraulic cylinder.
   • These brackets or supports provide additional stability and structural support to the cylinder assembly, ensuring proper alignment and load distribution.
2. Linkage Mechanisms:
   • External threads allow connecting rod mechanisms, such as grooves or ball joints, to the rod end.
   • These links facilitate the transfer of force and motion between hydraulic cylinders and other mechanical components, allowing for controlled movement and precise positioning.
3. Load-Bearing Structures:
   • The threaded connection fasteners the load-bearing structure or equipment directly to the piston rod end.
   • This enables the hydraulic cylinder to apply force and support the weight of external objects or machinery, making it suitable for lifting, pushing, or pulling heavy objects.

How To Repack A Hydraulic Cylinder?

Repacking a hydraulic cylinder involves replacing the seals and other components that may have worn out or damaged over time. Here’s a general step-by-step guide on how to repack a hydraulic cylinder:

1. Preparation:
   • Ensure that the hydraulic system is depressurized and the cylinder is fully retracted.
   • Gather the necessary tools and replacement seals or seal kits for your cylinder model.
   • Consult the manufacturer’s documentation or service manual for specific instructions or precautions.
2. Remove the Cylinder:
   • Disconnect any hydraulic lines or fittings connected to the cylinder.
   • Remove any mounting brackets or components that may be attached to the cylinder.
   • Carefully detach the cylinder from the equipment or machinery it is installed on.
3. Disassemble the Cylinder:
   • Securely hold the cylinder and remove the piston rod end cap or head using appropriate tools.
   • Extract the piston, piston rod, and related components from the cylinder barrel.
   • Inspect the components for any signs of wear, damage, or corrosion.
4. Remove Old Seals:
   • Locate and remove the old seals, including piston seals, rod seals, and any other seals in the cylinder.
   • Carefully clean the seal grooves and internal surfaces of the cylinder barrel and piston rod.
5. Install New Seals:
   • Lubricate the new seals with a compatible hydraulic fluid or sealant, as the manufacturer recommends.
   • Install the new seals in their grooves, ensuring proper orientation and alignment.
   • Use seal installation tools or suitable improvised methods to prevent sealing damage during installation.
6. Reassemble the Cylinder:
   • Reinstall the piston, piston rod, and related components into the cylinder barrel.
   • Apply a thin layer of hydraulic fluid or lubricant to the internal surfaces of the cylinder barrel and piston rod.
   • Carefully reattach the piston rod end cap or head, ensuring proper alignment and tightening to the manufacturer’s specifications.
7. Test and Reinstall the Cylinder:
   • Reconnect any hydraulic lines or fittings to the cylinder.
   • Carefully reinstall the cylinder onto the equipment or machinery, ensuring proper alignment and mounting.
   • Slowly pressurize the hydraulic system and check for any leaks or abnormal operation.
   • Fully extend and retract the cylinder to ensure proper functionality.
8. Maintenance and Testing:
   • Regularly inspect and maintain the hydraulic cylinder to ensure optimal performance and prevent premature seal failure.
   • Monitor for any signs of leaks, excessive wear, or other issues and address them promptly.
   • Conduct periodic testing and adjustments as the manufacturer recommends or based on the specific application requirements.

Tehase võimekus ja suutlikkus:

(1) Kokkupanek

Meil on esmaklassiline sõltumatu teadus- ja arendustegevuse montaažiplatvorm. Hüdrosilindrite tootmistöökojas on neli poolautomaatset tõstesilindrite koosteliini ja üks automaatne kallutussilindrite koosteliin, mille kavandatud aastane tootmisvõimsus on 1 miljon tükki. Spetsiaalsete silindrite töökoda on varustatud erinevate spetsifikatsioonidega poolautomaatse puhastusmontaažisüsteemiga, mille kavandatud aastane tootmisvõimsus on 200 000 ja mis on varustatud kuulsate CNC-töötlemisseadmete, mehaanilise töötlemise keskuse, suure täpsusega silindrite töötlemise eriseadmete, robotkeevitusmasina, automaatse puhastusmasina, automaatse silindri kokkupanemise masina ja automaatse värvimise tootmisliiniga. Olemasolevad kriitilised seadmed rohkem kui 300 komplekti (komplekti). Seadmete ressursside optimaalne jaotamine ja tõhus kasutamine tagavad toodete täpsusnõuded ja vastavad toodete kvaliteedinõuetele.

(2) Töötlemine

Töödeldav töökoda on varustatud kohandatud kallutatud rööpse treipingi keskuse, mehaanilise keskuse, kiire lihvimismasina, keevitusroboti ja muude seotud seadmetega, mis suudavad töödelda silindritorusid, mille maksimaalne siseläbimõõt on 400 mm ja maksimaalne pikkus on 6 meetrit.

(3) Keevitamine

(4) Värvimine ja katmine

Väikese ja keskmise suurusega silindri automaatse veepõhise värvipinnakattega liinide abil, et saavutada automaatne robotlaadimine ja mahalaadimine ning automaatne pihustamine, projekteerimisvõimsus 4000 tükki vahetuse kohta;
Meil on ka poolautomaatne suurte balloonide värvimise tootmisliin, mis töötab jõukettaga ja mille projekteerimisvõimsus on 60 kasti ühe vahetuse kohta.

(5) Testimine

Meil on esmaklassilised kontrolliseadmed ja katsestendid, et tagada silindri jõudlus vastavus nõuetele.

We are one of the best engineering hydraulic cylinder manufacturers. We can offer comprehensive engineering hydraulic cylinder stock. We also provide corresponding põllumajanduslikud käigukastid. Oleme eksportinud oma tooteid klientidele üle kogu maailma ja teeninud hea maine tänu meie suurepärasele tootekvaliteedile ja müügijärgsele teenindusele. Me tervitame soojalt kliente nii kodus kui ka välismaal, et võtta meiega ühendust, et pidada läbirääkimisi äri, vahetada teavet ja teha meiega koostööd!