Tagumine kõrvarõngas koos sfäärilise laagri nelja varda hüdrosilindriga

The rear earring with a spherical bearing four rod hydraulic cylinder is an innovative hydraulic element designed to provide superior performance and versatility in various industrial applications. With its unique rear earring design, spherical bearings, and four rod configuration, this four rod hydraulic cylinder offers enhanced stability, precise control, and increased load-bearing capacity.

Essential Characteristics Of Four Rod Hydraulic Cylinder:

Rear Earring Design:

1. • The rear stud design provides a safe and stable installation solution that ensures reliable operation even under heavy loads and extreme conditions.
   • It simplifies installation and allows easy integration into various hydraulic systems or equipment.

Spherical Bearing:

1. • The inclusion of spherical bearings enhances four rod hydraulic cylinder flexibility and compensates for misalignment, reducing stress and wear on cylinder components.
   • The spherical bearing allows for smooth and precise movement, even when dealing with angular or off-center loads.

Four Rod Configuration:

1. • The four rod configuration increases cylinder load-bearing capacity and stability, prevents deflection, and ensures accurate linear motion control.
   • It evenly distributes the load across the rod surface, reducing the risk of premature wear or failure.

High Performance and Efficiency:

• • This four rod hydraulic cylinder provides high force output and precise control, allowing efficient and effective operation.
  • It enables accurate positioning, rapid cycle times, and optimized productivity in various industrial applications.

Rear Earring With Spherical Bearing Four Rod Hydraulic Cylinder Parameter:

Tagumine kõrvarõngas koos sfäärilise laagri nelja varda hüdrosilindriga Kasutamise meetod:

Paigaldamine ja paigaldamine:

1. • Consider factors such as load requirements and space constraints to determine the appropriate installation location of the four rod hydraulic cylinder within the system or equipment.
   • Ensure that the mounting surface is clean, flat and able to support the weight of the cylinder.
   • Align the rear earring with the mounting surface and secure it firmly using recommended bolts or fasteners.

Hydraulic Connections:

1. • Connect the hydraulic supply lines to the cylinder ports, ensuring proper sealing to prevent leaks.
   • Follow the manufacturer’s recommendations for the type of hydraulic oil and fill the system to the recommended level.

Operation:

• • Activate the hydraulic system and control the movement of the cylinder using a hydraulic control valve or other appropriate control mechanism.
  • Adjust flow and pressure Settings to achieve the desired speed and force output.
  • Regularly monitor four rod hydraulic cylinder operation for any signs of abnormal behavior, such as leaks, overheating, or unusual noise.

Tagumine kõrvarõngas koos sfäärilise laagri nelja varda hüdrosilindriga Maintenance:

Regular Inspection:

1. • Perform routine visual inspections to check for signs of wear, leakage, or damage.
   • Inspect rod surfaces, seals, and mounting connections for abnormalities and address any problems promptly.

Lubrication:

1. • Follow the manufacturer’s lubrication interval guidelines and use the recommended lubricant to ensure smooth operation.
   • Lubricate rods, seals, and other moving parts to minimize friction and extend four rod hydraulic cylinder life.

Seal Replacement:

• • Over time, seals may wear out and need to be replaced. If a leak is detected, carefully remove the old seal and install the new seal according to the manufacturer’s specifications.

How To Remove Hydraulic Cylinder Pins？

Removing hydraulic cylinder pins requires careful handling to ensure safety and prevent damage to the cylinder or surrounding components. Here is a general step-by-step guide on how to remove hydraulic cylinder pins:

1. Prepare the Work Area:
   • Ensure you have a clean and well-lit work area.
   • Wear appropriate personal protective equipment, such as safety goggles and gloves.
2. Release Hydraulic Pressure:
   • If the cylinder is part of an active hydraulic system, relieve the pressure by retracting or deactivating the system. Consult the equipment’s manual for specific instructions.
3. Secure the Cylinder:
   • Use a suitable lifting device or support to secure the cylinder in place, ensuring it is stable and won’t move during the pin removal process.
4. Locate the Pins:
   • Identify the pins that need to be removed. Hydraulic cylinders typically have pins at each end connecting them to the mounting brackets or other components.
5. Remove Retaining Clips:
   • Some pins may be secured with retaining clips. Use pliers or a suitable tool to remove the retaining clips, taking care not to damage them.
6. Position a Punch or Drift:
   • Place a punch or drift tool against the end of the pin. Ensure the punch or drift is appropriately sized to fit within the pin’s diameter.
7. Strike the Punch or Drift:
   • Using a hammer, carefully strike the punch or drift tool to apply force to the pin. Start with light taps and gradually increase the force until the pin begins to move.
8. Remove the Pin:
   • Continue striking the punch or drift tool until the pin is fully dislodged. Apply force evenly to prevent any bending or damage to the pin.
9. Korrake protsessi:
   • If there are multiple pins to remove, repeat steps 4 to 8 for each pin until all have been successfully extracted.
10. Inspect the Pins:

• Once the pins are removed, inspect them for any signs of wear, damage, or deformation. If necessary, clean or replace the pins before reinstallation.

Tehase võimekus ja suutlikkus:

(1) Kokkupanek

Meil on esmaklassiline sõltumatu teadus- ja arendustegevuse montaažiplatvorm. Hüdrosilindrite tootmistöökojas on neli poolautomaatset tõstesilindrite koosteliini ja üks automaatne kallutussilindrite koosteliin, mille kavandatud aastane tootmisvõimsus on 1 miljon tükki. Spetsiaalsete silindrite töökoda on varustatud erinevate spetsifikatsioonidega poolautomaatse puhastusmontaažisüsteemiga, mille kavandatud aastane tootmisvõimsus on 200 000 ja mis on varustatud kuulsate CNC-töötlemisseadmete, mehaanilise töötlemise keskuse, suure täpsusega silindrite töötlemise eriseadmete, robotkeevitusmasina, automaatse puhastusmasina, automaatse silindri kokkupanemise masina ja automaatse värvimise tootmisliiniga. Olemasolevad kriitilised seadmed rohkem kui 300 komplekti (komplekti). Seadmete ressursside optimaalne jaotamine ja tõhus kasutamine tagavad toodete täpsusnõuded ja vastavad toodete kvaliteedinõuetele.

(2) Töötlemine

Töödeldav töökoda on varustatud kohandatud kallutatud rööpse treipingi keskuse, mehaanilise keskuse, kiire lihvimismasina, keevitusroboti ja muude seotud seadmetega, mis suudavad töödelda silindritorusid, mille maksimaalne siseläbimõõt on 400 mm ja maksimaalne pikkus on 6 meetrit.

(3) Keevitamine

(4) Värvimine ja katmine

Väikese ja keskmise suurusega silindri automaatse veepõhise värvipinnakattega liinide abil, et saavutada automaatne robotlaadimine ja mahalaadimine ning automaatne pihustamine, projekteerimisvõimsus 4000 tükki vahetuse kohta;
Meil on ka poolautomaatne suurte balloonide värvimise tootmisliin, mis töötab jõukettaga ja mille projekteerimisvõimsus on 60 kasti ühe vahetuse kohta.

(5) Testimine

Meil on esmaklassilised kontrolliseadmed ja katsestendid, et tagada silindri jõudlus vastavus nõuetele.

Me oleme üks parimaid kergeid nelja vardaga hüdrosilindrite tootjaid. Me saame pakkuda terviklikku kerget nelja vardaga hüdrosilindri varu. Pakume ka vastavaid põllumajanduslikud käigukastid. Oleme eksportinud oma tooteid klientidele üle kogu maailma ja teeninud hea maine tänu meie suurepärasele tootekvaliteedile ja müügijärgsele teenindusele. Me tervitame soojalt kliente nii kodus kui ka välismaal, et võtta meiega ühendust, et pidada läbirääkimisi äri, vahetada teavet ja teha meiega koostööd!